WORKING SETPOINT SETTING
The working setpoint is programmable within the lim-
its established with the parameters r1 and r2.
To modify the working setpoint value:
a) keep pushed the key
• the instrument displays the actual value
• the compressor LED flashes quickly
b) push and release the key or as long
as the instrument displays the desired value
• the working setpoint value gets increased or decreased
c) after the modify release the key last
• the instrument automatically turns out from the working
setpoint setting procedure.
CONFIGURATION PARAMETERS SETTING
Configuration parameters are arranged on two levels.
To gain access to the first level:
a) keep pushed for four seconds at least the keys
and
• passed four seconds the instrument displays the label
PA
To select a parameter:
a) push and release the key or as long
as the instrument displays the label of the de-
sired parameter
To modify a parameter value:
a) keep pushed the key
• the instrument displays the actual value
b) push and release the key or as long
as the instrument displays the desired value
• the parameter value gets increased or decreased
c) after the modify release the key last
• the instrument displays the label of the parameter again
To gain access to the second level:
a) enter inside the first level and select the label
PA
b) keep pushed the key
• the instrument displays the actual value
c) push and release the key or as long
as the instrument displays -19
• the label value gets increased or decreased
d) after the modify release the key last
• the instrument displays the label PA again
e) keep pushed for four seconds at least the keys
and
• passed four seconds the instrument displays the first pa-
rameter of the second level
To turn out from the configuration parameters
setting procedure:
a) keep pushed for four seconds at least the keys
and or do not operate with the keys
for fifty seconds at least.
ENGLISH
EC 6-294EC 6-294
EC 6-294EC 6-294
EC 6-294
Quick reference
14
communication
n0 0 2 --- 0 instrument functioning in the network (®)
n1 0 8 --- 0 instrument address (®)
n3 0 1 --- 0 enabling to work as slave instrument (§) (®)
n4 0 240 sec. 0 delay to the resources implementation in the slave instrument (®)
nA 0 15 --- 0 resources to implement in the slave instrument (®)
Additional informations:
• the symbol (§) indicates that the parameter is of the first level
• the symbol (*) indicates that the unit of measure depends from the parameter /8
• the symbol (®) indicates that the parameter is available on request only
• the symbol (**) indicates that the unit of measure depends from the parameter db.
EVERY CONTROL S.r.l.
Via Mezzaterra 6, 32036 Sedico Belluno ITALY
Phone 0039-0437-852468 (a.r.) Fax 0039-0437-83648
Internet addresses
http://www.everycontrol.it
(6 pages)
(6 pages)
(6 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals