Evco c-pro nano RACK User Manual download pdf (Page 25)

C-PRO NANO RACK E C-PRO MICRO RACK APPLICATION MANUAL

Page 25

Remote terminals

V LEDi

Panel version

V WALL

Wall version

In the keyboard there are 4 keys for pages navigation and values editing with the following meaning:

- UP and DOWN: parameters modification in editing; otherwise shift of the cursor. UP key, if it is

pressed for about 2 seconds during the display of an alarm, allows the alarm reset. If it is pressed it

makes all the active alarms shift, otherwise it shows the “none” default word in order to signalize the

absence of alarms.

- SET / ENTER: value confirmation in editing; otherwise entering of controls possibly associated

to the text where there is the cursor. ENTER key, if it is pressed for about 2 seconds, allows to enter the

main menu.

- STAND-BY / ESC: cancellation of the value in editing; otherwise default page request possibly

associated to the current page.. ESC key, if kept pressed for about 2 seconds, allows to switch on/freeze

the machine. If we press it in the main page, it allows to enter the list of all the active alarms.

The following leds are also used:

- L1 = summer led: it identifies the status of circuit 1 (TN).

Switched off: circuit switched off or in stand-by

Switched on: the circuit requires power

Flashing slowly: circuit switched off by digital input

Flashing fastly: circuit switched off by supervisor

- L3 = winter led: it identifies the status of circuit 2 (BT).

Switched off: circuit switched off or in stand-by

Switched on: : the circuit requires power

Flashing slowly: circuit switched off by digital input

Flashing fastly: circuit switched off by supervisor

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 81 82

No comments

Evco c-pro nano RACK User Manual Page 25